Additional Services Available

Anodizing: The electrolytic passivation process used to increase the thickness of the natural oxide layer on the surface of metal parts.

Bending: The process of bending material of various sizes and lengths to meet customers specifications.

Blanchard Grinding: The process of grinding the large surfaces of plate to meet customer specifications.

Boring: The process of cutting holes in large diameter long bar that doesn't leave any solid drops, only chips, from the inside of the bar.

Centerless Grinding: The process of grinding using the outside diameter (OD) of round bars for improved tolerance, straightness, and surface quality.

Chamfering: The process of grinding the end of bars to remove edge burrs and improve performance in automatically fed turning machines.

Circle Saw Cutting: The process of using a circle saw to cut rings or circles out of plate to meet customer specifications.

CNC Machining – Router: The process of using a computer-controlled cutting device to cut material of various sizes and lengths to meet to customers specifications.

Contour Saw Shapes: The process of contour sawing shapes out of plate to meet customer specifications.

Deburring: The process of removing burrs and sharp corners from cut piece pieces, often done by hand or a vibratory tumbler, depending on the size of the product and the number of pieces.

Double Disc Grinding: The process of simultaneously grinding two sides of plate to customer specification.

Drilling: The process of drilling holes into material of various sizes and lengths to meet customers specifications.

Forming: A metal working process to forming metal to the customer's specification.

Heat Treat/Annealing: The process of applying heat to metal in order to alter mechanical or physical properties to meet customer specifications.

Honing: The process of precision machining the internal diameter (ID) of tube or pipe to provide tight tolerances and a high quality surface.

Laser Cutting: The process of using a laser to cut plate and sheet to customer specifications.

Machining: The process of using machines to form material of various sizes and lengths to customer specifications.

Miter Cutting: The process of cutting angles in plate to meet customer specifications.

Plating: The process of adding an outer coating to metal to inhibit corrosion and/or enhance appearance.

Polishing: The process of smoothing or refining the surface of a material.

Precision Saw: The process of cutting material to meet tight tolerances of customer specifications.

Precision Shear: The process of mechanically cutting sheet to a customer specified size.

PVC Top Side, Bottom Side, or Both: The process of applying PVC to the top and/or bottom of sheet.

Rolling: The process of rolling metal to reduce and unify the thickness of material into a variety of shapes to meet customer specifications, including rings or ring segments.

Testing: Additional material tests can be conducted to help customers meet their requirements.

Trepanning: The process of boring out the internal diameter (ID) of large diameter round bar, leaving a usable core intact.

Tsune Saw: The process of using high speed bar sawing to meet tight tolerance customer specifications.

Tumbling: The process of deburring/polishing small parts in bulk using abrasives and rotation/vibrating motion in a barrel.

Waterjet Cutting: The process of using an extremely high-pressure water jet to cut or shear the material to customer specifications.

Welding: The process of joining materials by using high heat to melt the parts together and allowing them to cool, causing fusion.