Copper, Brass, and Bronze Strip for Stamping Plants
Copper, Brass, and Bronze Strip for Stamping Plants
Slitting
Slitting
Copper and Brass Sales precision coil slitting machinery is used only for non-ferrous metals to ensure peak performance at all times. Our slitters accommodate widths up the 48" and thickness up to .150" with tolerances as close as +- .002"
Slitting Specifications
Slitting Specifications
| Alloys | Aluminum, Copper, Copper Alloy, Stainless Steel, Zinc |
|---|---|
| Thickness Capability | Up to 0.015" depending on alloy |
| Width Capability | 0.125" min. 48" max |
| Tolerances | +-0.005 standard; tighter on request |
| Camber | One-half commercial tolerance |
| Burr | Less than 3% of material thickess typical |
| Other | ID Capabilities: 3", 4", 6", 10", 12", 14", 16", 20"; OD capabilities: up to 60", pinch roll capabilities for burr height control |
Slitting Specifications
| Alloys | Aluminum, Copper, Copper Alloy, Stainless Steel, Zinc |
|---|---|
| Thickness Capability | Up to 0.015" depending on alloy |
| Width Capability | 0.125" min. 48" max |
| Tolerances | +-0.005 standard; tighter on request |
| Camber | One-half commercial tolerance |
| Burr | Less than 3% of material thickess typical |
| Other | ID Capabilities: 3", 4", 6", 10", 12", 14", 16", 20"; OD capabilities: up to 60", pinch roll capabilities for burr height control |
Slitting Specifications
| Alloys | Aluminum, Copper, Copper Alloy, Stainless Steel, Zinc |
|---|---|
| Thickness Capability | Up to 0.015" depending on alloy |
| Width Capability | 0.125" min. 48" max |
| Tolerances | +-0.005 standard; tighter on request |
| Camber | One-half commercial tolerance |
| Burr | Less than 3% of material thickess typical |
| Other | ID Capabilities: 3", 4", 6", 10", 12", 14", 16", 20"; OD capabilities: up to 60", pinch roll capabilities for burr height control |
Slitting Specifications
| Alloys | Aluminum, Copper, Copper Alloy, Stainless Steel, Zinc |
|---|---|
| Thickness Capability | Up to 0.015" depending on alloy |
| Width Capability | 0.125" min. 48" max |
| Tolerances | +-0.005 standard; tighter on request |
| Camber | One-half commercial tolerance |
| Burr | Less than 3% of material thickess typical |
| Other | ID Capabilities: 3", 4", 6", 10", 12", 14", 16", 20"; OD capabilities: up to 60", pinch roll capabilities for burr height control |
Tension Leveling
Tension Leveling
Our unique coil-to-coil tension levelers remove high crowns and edgewise curvature from coiled strip products. This allows us to deliver coil product processed with the close-tolerance flatness and camber required for critical stamping, lead frame (nickel alloys) and chemical etching.
Coil and Strip Processing Capabilities
Coil and Strip Processing Capabilities
Slitting